Single & Dual Sockets (DuoCept®)
Truck-Mounted Overfill Prevention System Connectors Part of a complete ...

Connects up to 8 tanker-mounted, Two-Wire Optic Sensors to a Scully Overfill Prevention Monitor, such as an Intellitrol overfill and ground controller or a ST15 single point overfill prevention controller
Can also have an interlock switch installed, which allows the brakes to be applied when the Scully plug is connected, and a pressure switch can be fitted to make sure the connection of the vapor hose is completed before a permissive signal is given by the controller
|
Part #
|
Description
|
|---|---|
| 7508644 | Top Socket with 2 dummies only |
| 7508646 | Top Socket with nothing installed |
| 7508802/I | Top Socket with dummy and Interlock |
| 7508645 | Bottom Socket with 2 dummies only |
| 7508646/P | Bottom Socket with dummy and pressure switch |
| 7508802/I/T/2Comp | Bottom Socket with 2 dummies and Interlock |
| 7508802/IP | Bottom Socket with 1 dummy, Interlock and pressure switch |
| 7508802/IP/1Comp | Bottom Socket with 2 dummies, Interlock and pressure switch |
| 7508802/IP/-DUMMY | Bottom Socket with Interlock and pressure switch |
| 7508802/I/B/1Comp | Bottom Socket with 2 dummies and Interlock only |
| 7508802/IP/2Comp | Bottom Socket with 2 dummies, Interlock and pressure switch |
|
Part #
|
Description
|
|---|---|
| 7520628 | Housing Gasket |
| 0100774 | Machined Enclosure Polyester |
| 7531559 | Top Socket Enclosure |
| 7531276 | Socket Faceplate with Interlock hole |
| 7531276UK | Socket Faceplate without Interlock hole |
| 7508542 | Electronic Dummy, SD-SCE 5 element |
| 0100543 | Pressure Switch Assembly |
| 0100181 | Interlock Switch |
| 0100179 | Bulkhead Connector 4mm |
| 508574 | Polyvinyl Dust Cap and Cable Assembly, gree |